Pandora Radiator 140x50 – Vertical Designer Matte Black Bathroom Heater

PRO-TERM MANUFACTURER Bathroom radiators tailored to your needs!

PANDORA BATHROOM RADIATOR

HIGHER QUALITY STEEL AND COLOUR!!!!

Model: PANDORA 140/50

➡️Width: 540 mm (A)

➡️Height: 1420 mm (H)

➡️Connection spacing: 500 mm (B)

➡️Heat output: 698 watts

➡️Colour: matt black

➡️Connection: bottom

➡️Thread: 1/2 inch

➡️Material: steel

➡️Type of coating: powder coating

It is not possible to connect an electric heater to the radiator!

How to choose the power of the radiator?

The power of the radiator should be selected according to the size of the room.

The above 698W radiator will heat a room with an area of 7 m².

Thermal and pressure parameters of the radiator:

☑️temperature 75/60/20

☑️working pressure 0.6 MPa

☑️test pressure 0.90 MPa

Depending on the installation in your house/flat, you need to calculate the power of the radiator.

☑️75/65/20 – for new solid fuel boilers/gas/oil boilers, gas furnaces, district heating networks

☑️55/45/20 – for modern condensing boilers, gas furnaces,

☑️50/40/20, 45/35/20 – medium and low temperature systems, heat pumps,

☑️90/70/20 – high temperature system for solid fuel boilers.

The specified radiator output is indicated for the 75/65 parameter; for other parameters, the output should be calculated according to the following information:

Add or subtract the following values from the radiator output depending on your installation:

➡️55/45/20 – 50%

➡️50/40/20 – 60%

➡️45/35/20 – 70%

➡️90/70/20 + 20%

A functional bathroom radiator with bottom connection that will perfectly heat your bathroom. Its simple design makes it easy to hang and dry towels. The product is adapted for connection to an electric heater, allowing it to be used outside the heating season.

CERTIFIED PRODUCT ⭐⭐⭐⭐⭐

The bathroom radiators we offer are made of the highest quality materials with great care. We place the main emphasis on the quality, durability and strength of the materials used. In addition, each of our products undergoes very rigorous testing before it reaches the customer.

This means you can be sure that you are receiving a product of the highest quality.

The radiators are tested to ensure that our products are fully compliant with European Standards PN-EN 422 and meet the requirements of the CE mark (European Certificate).

Included:

✅modern vent

✅mounting brackets

✅plastic caps for safe transport

✅proof of purchase (e-invoice)

Valves must be purchased separately – available in our other auctions!

We also manufacture radiators in other colours and sizes

(available colours can be viewed in other auctions)

Below is a palette of available colours:

All radiators are manufactured to your individual order!

We make every effort to ensure that you are satisfied with your purchases at our auctions, while informing you that the colours shown in the visualisations may vary depending on the colour settings on your monitor.