HEATER FOR BATHROOM RADIATOR 900W CHROME

ELECTRIC HEATER FOR BATHROOM RADIATOR 900W
1/2” 900 W *CHROME

TECHNICAL DATA: 

 POWER: 900 W 

 THREAD: 1/2” 

 VOLTAGE: 230V / 50 Hz 

RATED CURRENT: 3.9 A 

 HEATING ELEMENT LENGTH: 360 (mm) 

 TEMPERATURE CONTROL: 10°C – 60°C 

 CONNECTION CABLE: 3 x 0.75 mm² 

RECOMMENDED FOR HEATERS: 900W – 1200W

Device:

• is easy to install without the help of a professional (the seal ensures installation without tow or Teflon tape),

  is easy to use,

  provides a wide range of temperature control from 13°C to 65°C,

  provides precise temperature measurement thanks to the use of an electronic regulator,

  ensures the lowest energy consumption – thanks to the use of a temperature regulator,

  has a heating element with the highest durability,

Additional advantages include:

• off-season heating

  towel drying – warm and dry towels all year round

  smooth temperature control – using the heater outside the heating season ensures a comfortable warm bathroom all year round.

  exceptional comfort

  electronic thermostat – the temperature controller switches off the heater when the set temperature is reached

  environmentally friendly

  energy saving

The heating element with an electronic thermostat is designed for heating water in bathroom radiators, convector heaters and other heating devices. It is used as a supplementary element in central heating systems, providing an additional source of heat (it supports water heating during the heating season, e.g. in radiators connected to the central heating system). It can also be used for independent heating of small heating systems outside the season, e.g. bathroom radiators. It is a convenient solution for heating rooms and drying towels outside the heating season. These heaters can also be used in other heating systems.

The device consists of a specially designed heating element, an electronic thermostat that ensures precise temperature control of the radiator (minimum temperature can be set to 13°C to prevent water from freezing in the system) and a Class I power cord with a universal plug. T

he heater has a thermal fuse which cuts off the power supply if the maximum temperature is exceeded. A LED indicator light shows that the heater is in operation. High quality of the device guaranteed and confirmed by the CE certificate.